Tune Up Kit Fits Case Replaces A36136

One New Aftermarket Tune Up Kit

Tech Info:
-Kit Contains:
–
-(1) 4 Cylinder Spark Plug Wiring Set
–These will fit most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion and 90 degree boots.
–Note: You must cut the wires to length and crimp the ends with a crimping tool.
–Wire lengths are approximately;
-(2) 24-3/4″ spark plug wires
-(1) 29-3/4″ spark plug wire
-(1) 34-1/2″ spark plug wire
-(1) 23-1/2″ long coil wire.
–The coil wire is made from excess wire left over from the spark plug wire.
–
-(1) Distributor Cap
-This cap fits Prestolite / Autolite distributors only, with clip held cap.
-This distributor cap does NOT fit Model IBT, IGW, or IGZ distributors.
-3-3/8″ outside diameter
-Replaces Part Number(s): A8368, A8638, IG1324D, IG1324H, IG1324J
–
-(1) Ignition Tune-Up Kit with Rotor
–Kit includes: point set, 0.020″ point gap, vibration resistant condenser, rotor
–Only fits distributors with 3-3/8″ outside diameter cap
-Replaces Part Number(s): IBB2042SS, IG1657R, IGW30280S
–
-(1) Lube Filter
–Threaded neck type can
–4-27/32″ length
–3-17/32″ outside diameter
–2-3/4″ – 4 thread
-Replaces Part Number(s): A36136, VT3589
–
-(4) Spark Plugs
–M18-1.50mm thread
–1/2″ Thread reach
–7/8″ Hex
–Preset Gap 0.034″
–Medium hot
–Power tip / Non-Resistor

Made to Fit Case:
Tractor Models: Various
Replaces Part Number(s): A8368, A8638, IG1324D, IG1324H, IG1324J, IBB2042SS, IG1657R, IGW30280S, A36136, VT3589

Industrial/Construction Models: Various
Replaces Part Number(s): A8368, A8638, IG1324D, IG1324H, IG1324J, IBB2042SS, IG1657R, IGW30280S, A36136, VT3589

Models This Part Fits:

VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAHAdditional Information: (1) 4 Cylinder Spark Plug Wiring Set These will fit most 4 cylinder models. They have copper core wires with aluminum coating to prevent corrosion and 90 degree boots. Note: You must cut the wires to length and crimp the ends with a crimping tool. Wire lengths are approximately; (2) 24-3/4″ spark plug wires (1) 29-3/4″ spark plug wire (1) 34-1/2″ spark plug wire (1) 23-1/2″ long coil wire. -The coil wire is made from excess wire left over from the spark plug wire.(1) Distributor Cap This cap fits Prestolite / Autolite distributors only, with clip held cap. This distributor cap does NOT fit Model IBT, IGW, or IGZ distributors. 3-3/8″ outside diameter Replaces Part Number(s): A8368, A8638, IG1324D, IG1324H, IG1324J (1) Ignition Tune-Up Kit with Rotor Kit includes: point set, 0.020″ point gap, vibration resistant condenser, rotor Only fits distributors with 3-3/8″ outside diameter cap Replaces Part Number(s): IBB2042SS, IG1657R, IGW30280S (1) Lube Filter Threaded neck type can 4-27/32″ length 3-17/32″ outside diameter 2-3/4″ – 4 thread Replaces Part Number(s): A36136, VT3589 (4) Spark Plugs M18-1.50mm thread 1/2″ Thread reach 7/8″ Hex Preset Gap 0.034″ Medium hot Power tip / Non-Resistor