Complete Overhaul T-Bolt & Clutch Kit Fits John Deere Replaces A352R

One New Aftermarket Complete Overhaul T-Bolt & Clutch Kit

Tech Info:
-(3) Clutch Operating Bolt
-9/16″ diameter
-6-7/16″ overall length
-Replaces Part Numbers: A4354R
–
-(3) Clutch Dog
-3 required per tractor
-Replaces Part Numbers: C74R
–
-(3) Clutch Dog Pin
-0.495″ diameter
-2.500″ usable length
-3 used per tractor
-Replaces Part Numbers: D355R
–
-(1) Facing Clutch Pulley
-10″ disc outside diameter
-0.393″ thick
-Replaces Part Numbers: AA5082R, AA6129
–
-(2) Facing Clutch Disc
-10″ outside diameter
-6-3/4″ inside diameter
-0.150″ thick
-The side with the grooves faces the driving disc
-1-5/8″ lining width
-Replaces Part Numbers: R90215, C614R
–
-(1) Brake Pad Pulley
-Non-asbestos lining with countersunk brass rivets
-Replaces Part Numbers: AB4748R, AF4748R, RE29790
–
-(3) Clutch Disc Adjusting Spring
-1.915″ long
-0.740″ outside diameter
-0.500″ inside diameter
-0.120″ wire thickness
-The clutch disc adjusting spring mounts to the outer cast iron adjusting disc
-3 springs used per tractor
-Replaces Part Numbers: A352R
–
-(3) Clutch Adjusting Nut
-9/16″ – 18 NF
-Grade 5
-Slotted hex nut, 9/16″
-3 used per tractor; sold individually
-Replaces Part Numbers: 14H862, AD2850R, D2789R, R20228
–
-(3) Clutch Pressure Plate Spring (Belleville) Washer
-0.572″ inside diameter
-0.937″ outside diameter
-0.035″ thick
-Spring steel
-Torque initially to 15 FT pounds, then adjust as needed
-Use to smooth out the hand clutch engagement
-3 used per tractor
-Replaces part Numbers: JDS1626

Made to Fit John Deere:
Models: 60, 620, 630
Replaces Part Number(s): A4354R, C74R, D355R, AA5082R, AA6129, R90215, C614R, AB4748R, AF4748R, RE29790, A352R, JDS1626

Models This Part Fits:

620, 630Additional Information: (3) Clutch Operating Bolt9/16″ diameter6-7/16″ overall lengthReplaces Part Numbers: A4354R(3) Clutch Dog3 required per tractorReplaces Part Numbers: C74R(3) Clutch Dog Pin0.495″ diameter2.500″ usable length3 used per tractorReplaces Part Numbers: D355R(1) Facing Clutch Pulley10″ disc outside diameter0.393″ thickReplaces Part Numbers: AA5082R, AA6129(2) Facing Clutch Disc10″ outside diameter 6-3/4″ inside diameter 0.150″ thickThe side with the grooves faces the driving disc1-5/8″ lining widthReplaces Part Numbers: R90215, C614R(1) Brake Pad PulleyNon-asbestos lining with countersunk brass rivetsReplaces Part Numbers: AB4748R, AF4748R, RE29790(3) Clutch Disc Adjusting Spring1.915″ long0.740″ outside diameter0.500″ inside diameter0.120″ wire thicknessThe clutch disc adjusting spring mounts to the outer cast iron adjusting disc3 springs used per tractorReplaces Part Numbers: A352R(3) Clutch Adjusting Nut9/16″ – 18 NFGrade 5Slotted hex nut, 9/16″3 used per tractor; sold individuallyReplaces Part Numbers: 14H862, AD2850R, D2789R, R20228(3) Clutch Pressure Plate Spring (Belleville) Washer0.572″ inside diameter0.937″ outside diameter0.035″ thickSpring steelTorque initially to 15 FT pounds, then adjust as neededUse to smooth out the hand clutch engagement3 used per tractorReplaces part Numbers: JDS1626

Reference Numbers:

A4354R, AA6129R, C614R, C74R, D355R, RE29790