Water Pump fits Zetor 5211 5245 7211 3320 4320 5340 6211 6340 7245 7745 6245

One New Aftermarket Replacement Water Pump (with Gasket)

Fits Zetor Tractor models:
3011, 3045, 3320, 3340, 3511, 3545, 4320, 4340, 4712, 4718, 4911, 5011, 5211, 5245, 5320, 5340, 5511, 5545, 5611, 5645, 5647, 5711, 5718, 5745, 5748, 5911, 5945, 6011, 6045, 6211, 6245, 6320, 6340, 6711, 6718, 6745, 6748, 6911, 6945, 7011, 7045, 7211, 7245, 7320, 7321, 7340, 7341, 7711, 7745

Technical Information:
Comes with Pump to Backplate Gasket. With Hub
Dim A (1)Impeller Dia – 3.46″ (88mm)
Dim B (2)Front Shaft Dia – .55″ (14mm)
Actual Photo
Colors May Vary

NOTES ON THIS WATER PUMP: The Pulley Attaches with 4 Bolts. Some Models Use One Large Nut.

NOTE: Pump comes with plug in bypass hole (see pictures) which, if necessary, requires a 12mm or 7/16″ hex head socket to remove.

Replaces Part Numbers:
531962010615, 531970010675, 531970010695, 62010615, 70010675, 70010695, LP3634

Models This Part Fits:

2011, 2511, 3011, 3045, 3320, 3340, 3511, 5011, 5211, 5245, 5320, 5340, 5511, 5516, 5545, 5611, 5645, 5647, 5711, 5718, 5745, 5748, 5911, 5945, 6011, 6045, 6211, 6245, 6320, 6340, 6711, 6718, 6745, 6748, 6911, 6945, 7011, 7045, 7211, 7245, 7320, 7321, 7340, 7341, 7711, 7745, ENGINE:7711, Z7701Additional Information: Impeller Diameter: 3.46″ (88mm)Front Shaft Diameter: .55″ (14mm)Overall Length: 160mmOverall Width: 170mmOverall Height”: 120mmHub Holes: (4)

Reference Numbers:

1806-6200, 531962010615, 531970010675, 531970010695, 62010615, 62010615-A, 62010615-R, 70010675, 70010695, LP3634, LP3634-A